MZ Sport Aircraft Engines
( These engines have been in manufacture in Italy since 1982 and still going strong )
USA-Located Engine Overhaul and Service Center Now Open
Contact Hoverhawk Corporation at +251-609-0969 or email to Hoverhawk99@hotmail.com for more details.
We Ship World-Wide
Replace your expensive Rotax engine
Ask About Our Lay-A-Way Plan!
Engines on Sale Through August 31, 2010!
MZ202 Engine
|
|
|
*Sale Price--$5,320.00 USD
Save approximately 42 pounds in all-up
installed weight by using the MZ202
View and print the MZ202 engine Instruction and Maintenance Manual HERE. Due to its lightweight high-power and reliability, the MZ202 engine is used exclusively to power the Mosquito Helicopter! |
MZ201 Engine
|
|
*Sale Price--$4,260.00 USD
| Specifications Bore: 76 mm Stroke: 69 mm Displacement: 626 cc Rotation: Anti-clockwise from PTO Cooling: By propeller Ignition: Dual variable electronic Fuel Metering: Single Tillotson carb Starter: Electric and Recoil starter starter Generator: 180 Watt 13.8V Max brake output: 45 HP @ 4700 RPM Max permissible RPM: 4700 RPM Lubrication: Oil (Castrol TTS) in premium unleaded gas 50:1 Reduction: Belt reduction ratio's available: 1.77 to 1, 2.08 to 1 and 2.34 to 1 (gearbox optional) Complete engine weight: 31 kg (69 lbs.) incl. reduction, electric starter, exhaust Engine shipping info: Shipping weight: 80 lbs. in foam-filled carton; Carton size: 29"Lx17"Hx21"W |
|
| To meet a specific need, the MZ201 was created, an engine derived from big brother MZ202 and reduced to 45 Hp. This configuration is best for motorglider applications and single place ULM where the single cylinder engine is too small and our MZ202 is too powerful. With this performance we can use a belt reduction system, and the lower power does not need the forced air cooling. The engine weight complete with reduction, carburetor and muffler is only 31 kg (69 lbs.). The torque curve, being very flat, is optimal for a propeller. The fuel consumption is very low due to the double CDI ignition system with variable ignition points. A single Tillotson diaphragm carburetor with built-in fuel pump is standard. The MZ201 is supplied with electric starter, recoil starter, exhaust system, wiring harness, air filter and belt reduction. Optionally available: RZ2 gear box with clutch, fan cooled. |
MZ301 Engine
|
|
*Sale Price--$8,715.00 USD
| Specifications Bore: 76 mm Stroke: 69 mm Displacement: 940 cc Rotation: Anti-clockwise from PTO Cooling: Direct drive forced fan cooled system Ignition: Dual variable electronic Fuel Metering: Carburetors (Bing 54) Starter: Electric Generator: 180 Watt Max brake output: 85 HP @ 5800RPM Max permissible RPM: 6250 RPM Lubrication: Oil (Castrol TTS) in premium unleaded gas 50:1 Reduction ratio: 2.18, 2.55, 2.88, 3.11, 3.66 to 1 Complete engine weight: 53 kg (117 lbs.) incl. electric starter, muffler, etc. Engine shipping info: Shipping weight: 130 lbs. in foam-filled carton; Carton size: 29"Lx17"Hx21"W |
|
View and print the MZ301 engine Instruction and Maintenance Manual HERE
| The MZ301, with its 3-cylinders in line, may be the
best possible layout for a two-stroke engine. It is virtually vibration-free and has a
very gradual power output. Three sparks per revolution make this engine extremely elastic
with low fuel consumption. Manufacturing with state-of-the-art technology has made it
possible to keep weight down to 53kg (117 lbs). It comes complete with: Electric starter,
3 into 1 exhaust manifold, 3 Bing 54 carburetors, fuel pump, direct drive forced fan
cooling and the RZ2 gearbox with clutch. This engine is compatible with the GTA 2-blade in-flight adjustable prop with
GSC wooden blades. |
MZ34 Engine
|
|
*Sale Price--$2,765.00 USD
| Specifications Bore: 76 mm Stroke: 69 mm Displacement: 313 cc Rotation: Counterclockwise Starter: Both Recoil and Electric Start Output: 30 hp @ 6250 rpm Lubrication: Oil (Castrol TTS) in premium unleaded gas 50:1 Carburetor: Tillotson with built-in fuel pump Reduction: 1.84, 2.05, 2.14, 2.24, 2.34 to 1 Engine weight: 19 kg (42 lbs.) Exhaust: Tuned Engine shipping info: Shipping weight: 55 lbs. in foam-filled carton; Carton size: 29"Lx17"Hx21"W |
|
| The MZ 34 is designed for powered paragliding applications (PPG), single or two place PPG trikes, single place HG trikes and light single place ultralight planes. Lots of high end torque gives this engine outstanding flying capabilities. Built in decompression channel guarantees easy pull start. Tuned exhaust ensures maximum power and quiet operation. Nikasil coated cylinder provides for reliability and longevity of the motor. Engine comes equipped with recoil or electric starter, fuel pump, exhaust system and redrive. |
Manual can be downloaded here.
Manual for Tillotson carburetor here.
MZ35 Engine for a Motorglider
|
*Sale Price--$3,035.00 USD
| Specifications Bore: 76 mm Stroke: 69 mm Displacement: 313 cc Rotation: Counterclockwise Starter: Both Recoil and Electric Start Output: 30 hp @ 6250 rpm Lubrication: Oil (Castrol TTS) in premium unleaded gas 50:1 Carburetor: Tillotson with built-in fuel pump Reduction: 1.84, 2.05, 2.14, 2.24, 2.34 to 1 Engine weight: 19 kg (42 lbs.) Exhaust: Tuned Engine shipping info: Shipping weight: 55 lbs. in foam-filled carton; Carton size: 29"Lx17"Hx21"W |
| The MZ 35 is a copy of MZ 34 but designed for motor glider in mind.Its streamlined shape ensures the best aerodynamic qualities in flight. Lots of high end torque gives this engine outstanding flying capabilities. Built in decompression channel guarantees easy pull start. Tuned exhaust ensures maximum power and quiet operation. Nikasil coated cylinder provides for reliability and longevity of the motor. Engine comes equipped with recoil or electric starter, exhaust system and redrive. |
Manual can be downloaded here.
*SALE PRICES apply through August 31, 2010. Add shipping costs. Flat rate shipping costs by UPS ground are: MZ301, $275; MZ202, $220; MZ201, $200; MZ34/35, $175. Flat rates apply to the 48 contiguous states. Request a shipping quote for other areas worldwide.
_____________________________________________________________________________
How to Order:
To place an order, call us or send us an e-mail and tell us what you want to purchase and provide detailed ship to address. We will respond promptly with a total delivered cost. Pay by major credit card up to $2,000.00 or the full amount by bank wire or by official bank check from a U.S.A. based bank. Once your funds are received your order will be shipped by the method you specified. These engines can be shipped by UPS or FedEx or whichever method you prefer.
Hoverhawk99@hotmail.com
_____________________________________________________________________________
Need a propeller to go with your engine? WarpDriveProps.com Other Interesting Web Links: RotorScooter.com Hoverhawk.com PowerFinProps.com
Contact Information: Hoverhawk Corporation +251-609-0969 (voice) +815-346-5300 (fax) hoverhawk99@hotmail.com
SELLER'S NOTICE AND DISCLAIMER
Prices, specifications, and availability are subject to change without notice. Products and materials advertised on this website are sold to the public with the understanding that the buyer assumes all risks and hazards involved in their use or application. Buyer/User acknowledges assumption of all risk and hazards by purchasing and/or using the products advertised and sold on this website. No express or implied warranties asserted nor fitness of merchantability claimed by Seller. ALL SALES ARE FINAL.
